True mAh +/- 5%:     8000mAh

Voltage:                     3.7V

C rate:                       150C

Size:                          18.5mm x 47mm x 93mm Hardcase

Weight:                      162gr

Wire Size:

The post SMC 1S 8000mAh 150C ((( High Cycle Life ))) 162gr appeared first on Power Push Batteries.

• Shorty Ultra-LCG Low Center of Gravity Design keeps the weight down low and improves car handling.
• Lighter, Smaller, Faster design.
• 140C Discharge Rate delivers power on demand.
• 5mm High Power Bullet Connectors are gold plated for ultra-low resistance and maximum current flow.
• 2mm Balance Port for balance charging.
• Hard Box housing protects cells and connector terminals.

The post 2s 7.4 Volt U.L.C.G same size as a 1s appeared first on Power Push Batteries.

 All Li-Po packs wrap in 6m heat shrink “FOR ULTRA POWER  KEEPS HEAT IN”

The post Power Push 6300 HV 7.6V 2S 130c Shorty appeared first on Power Push Batteries.

Power Push Lipo Battery Warmer Bag – Lipo’s can lose up to 40% of their capacity when used in cold weather. This of course will drastically shorten flight/drive times and of course performance. This superb Power Push lipo warmer is perfect for the RC enthusiast who is flying/driving in cold weather/climate and also for competition pilots/drivers looking to squeeze every ounce of capacity from their battery for optimum performance, even in warm ambient temperatures. You can select the desired temperature via the simple-to-operate buttons/LED display on the front of the bag, the inbuilt microprocessor offers a 7-step heater range from 25ºC ~ 45ºC (77ºF ~ 113ºF), and the sealable bag, which is lined with a heat reflective material, keeps your lipo snug and ready to use.

Key features of the Power Push Lipo Battery Warmer Bag include:

1. Temperature Control: The bag offers a user-friendly interface with buttons and an LED display to select the desired temperature. This allows users to customize the bag’s heating settings according to their specific needs.
2. Microprocessor Control: The built-in microprocessor offers precise temperature control, ensuring that the battery is warmed to the chosen temperature range effectively.
3. Heating Range: The bag provides a range of 25ºC to 45ºC (77ºF to 113ºF), which covers a spectrum of temperatures suitable for most LiPo batteries and cold weather conditions.
4. Heat Reflective Lining: The bag’s interior is lined with a heat-reflective material, which helps retain the warmth generated by the internal heating elements. This ensures that the battery remains snug and warm inside the bag.
5. Sealable Design: The bag is sealable, which helps to trap heat and maintain a consistent temperature inside. This feature also prevents heat loss to the external environment.
6. Performance Optimization: By using the Power Push Lipo Battery Warmer Bag, users can maintain their batteries at an ideal temperature, which can lead to better battery performance, extended flight/drive times, and overall improved vehicle performance.
7. Application: The bag is designed not only for enthusiasts operating RC vehicles in cold weather but also for competitive pilots and drivers who require maximum battery capacity and performance, even in warmer conditions.
8. Easy to Use: The bag’s simple controls and LED display make it easy for users to set and monitor the desired temperature.

It’s important to note that using the bag won’t magically increase the overall capacity of a LiPo battery, but it can help prevent capacity loss due to cold temperatures. Additionally, while the product seems promising, it’s always recommended to follow the manufacturer’s instructions and safety precautions when using any electronic device, especially with batteries involved.

The post Power Push Lipo Battery Warmer appeared first on Power Push Batteries.

mAh +/- 5%:              6300mAh

Voltage:                     7.4V

C rate:                       150C

Size:                      47mm wide  23mm tall  138mm long

Weight:                 285 gr +/- 5gr. 

All Li-Po packs wrap in 6m heat shrink    ” FOR ULTRA POWER  KEEPS HEAT IN”

The post 6300mAh 150C 2s LOW PRO MOJO 285gr 47mm wide 23mm tall 138mm long 7.4v appeared first on Power Push Batteries.

• 2s Shorty 7.4v 150c
• 96mm l 47.5mm w 25mm h

 All Li-Po packs wrap in 6m heat shrink “FOR ULTRA POWER  KEEPS HEAT IN”

The post PowerPush 4600mah/150c Lipo Battery 2s Shorty 7.4v appeared first on Power Push Batteries.

This fixed-timing motor was commissioned for production by the USGT organization.

All pieces of this motor are checked during assembly to meet the USGT tolerance. The motor is 100% rebuildable for service. Spare parts are available, NO rotors, sensors, or stators outside of the below specification provided will be sold in any way shape, or form, aluminum or stainless Steel main can or end bell screws are prohibited for USGT competition.

MOTOR CHECKLIST

• ROOM TEMP: 75DEG FOR ALL MOTORS DURING ASSEMBLY
• AVERAGE STATOR POLE RESISTANCE: (TOLERANCE 30.0–30.7 ohms)
• AVERAGE TIMING AT 5,000RPM: (TOLERANCE 30–33deg)
• TOTAL SENSOR GAP: (TOLARANCE 0–3deg)
• ROTOR ALIGNMENT: (TOLERANCE 0–5deg)

Note: This motor comes Sealed in its Factory case  

The post USGT 21.5 Tour Spec Motor Factory Sealed ( 1/12 Scale) Black Endbell ( 30 Fixed Timing) appeared first on Power Push Batteries.

• Compatible models include T, XT60, XT90, miniT, 2.0, 3.5, and 4.0mm banana plug
• Connection adjustable, deans plug slot max. extend to 7mm
• Made of aluminum alloy, this red soldering jig is sturdy and durable
• A thermal insulating layer, a black thermal insulating layer surrounded by holes, can effectively prevent heat propagation

The post Power Push Connector Soldering, Aluminum Alloy Multifunction Soldering Station Jig Aid for XT60 XT90 T Banana Connector appeared first on Power Push Batteries.

mAh +/- 5%:              5200mAh

Voltage:                     7.4V

C rate:                       50C

Size:                          25mm x 47mm x 139mm Hardcase

Weight:                 310gr +/- 5gr.

All Li-Po packs wrap in 6m heat shrink     “FOR ULTRA POWER  KEEPS HEAT IN”

The post New Mud Boss 5200mAh 50C 310gr 10 Gage wire ultra low Resistance .5 to .8 per cell Ultra Hi Power appeared first on Power Push Batteries.

SHO- SUPER HIGH OUTPUT

Low Resisance

weight -156 gr

The post CRC 1S 7500mah 150C SHO SUPER HIGH OUTPUT 156 gr Low Resistance appeared first on Power Push Batteries.